Printing
Temperature:

Notes:

• No special hardware or nozzles are required
• Prints like PLA on non-heated beds.
• In our experience, good results were achieved using standard PLA parameters ranging from 190-225C nozzle with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required but up to 60C okay. Beware, if the bed temperature is too high, your part base could actually heat treat while printing, increasing warping and decreasing adhesion. Some shrinkage will occur in the heat treating process, so dimension critical parts may need to be scaled appropriately (as much as 2.5% in our experience).